<track id="6lrpm"><ruby id="6lrpm"></ruby></track>

  1. <acronym id="6lrpm"></acronym>
    2. 傳感器
      TMR2102 大動態范圍TMR線性傳感器
      • sop8
      • dfn8l(3x3x0.75)
      • sop8
      • dfn8l(3x3x0.75)
      供電電壓:0~7 V
      本底噪聲(nT/rt(Hz) @1Hz):~10
      封裝形式:SOP8 DFN8L(3×3×0.75)
      交付周期:In stock
      • TMR2102

      產品概述:TMR2102采用了一個獨特的推挽式惠斯通全橋結構設計,包含四個非屏蔽高靈敏度TMR傳感器元件。當外加磁場沿平行于傳感器敏感方向變化時,惠斯通全橋提供差分電壓輸出,并且該輸出具有良好的溫度穩定性。TMR2102性能優越,采用兩種封裝形式:SOP8(6mm × 5mm × 1.5mm)和DFN8(3mm × 3mm × 0.75mm)。





      sop8 dfn8l(3x3x0.75)


      [1]Luong V S, Chang C H, Jeng J T, et al. Reduction of Low-Frequency Noise in Tunneling-Magnetoresistance Sensors With a Modulated Magnetic Shielding[J]. IEEE Transactions on Magnetics, 2014, 50(11):1-4.

      摘要:The high-noise level at low frequency in magnetic tunnel junction (MTJ) sensors is the key problem for their applications in measuring the low values of static magnetic field. In this paper, we investigated a shielding-type flux chopper to resolve the 1/f noise issue. By the using a cylindrical chopper with its axis perpendicular to the sensing direction of MTJ sensor, the noise at 1 Hz was reduced from 4 to 0.3 nT/rtHz by chopping the magnetic flux at 5 kHz. The reduction in noise can be qualitatively explained by the 1/f behavior and the chopping efficiency. The proposed method is promising in enhancing the detectivity of MTJ sensor for sensing the static geomagnetic field.

      出版源:《IEEE Transactions on Magnetics》, 2014, 50(11):1-4

      關鍵詞:1/f noise / magnetic field measurement / magnetic flux / magnetic noise / magnetic sensors / magnetic shielding / magnetoresistive devices / tunnelling magnetoresistance / 1/f noise / MTJ sensor

      [2]Development of low-noise three-axis magnetometer with tunneling-magnetoresistance sensors

      摘要:Three dimensional magnetic sensors play important roles for multiple applications, e g position sensing, automotive application, and geomagnetic navigation. In recent decades, many groups developed various kinds of vector magnetometer, including Hall effect, the anisotro-pic magnetoresistance (AMR) effect, giant magnetoresistance (GMR) sensors, and tunneling magnetoresistance (TMR) magnetometer. For all the designs, the inaccuracy in alignment of sensors or flux-guide leads to non-orthogonality between each sensing directions Another issue on three-axis magnetometer is to achieve a low-noise without increasing the size too much. In order to deal with this issues, several extrinsic methods have been reported, e g TMR arrays, flux concentrator, and flux-chopping techniques. Interestingly, the 1/f noise can be reduced by a factor of 12 with a shielding type magnetic flux chopper, which was realized successfully in the ref. In this work, we design and manufacture a low-noise vector magnetometer comprising three TMR sensors orthogonally aligned and placed in the central of a shielding flux chopper The non-orthogonality issue can be solved by the calibration process using a voltage-to-field transfer matrix.

      出版源:IEEE Magnetics Conference, 2015

      關鍵詞:1/f noise / Hall effect / geomagnetic navigation / giant magnetoresistance / magnetic anisotropy / magnetic sensors / magnetometers / magnetoresistive devices / tunnelling magnetoresistance / 1/f noise


      申明:(1)多維科技承諾本說明書所提供的信息是準確和可靠的,所公開的技術未觸犯其他公司的專利且具有自主知識產權。多維科技具有保留為提高產品質量,可靠性和功能以更改產品規格的權力。多維科技對任何超出產品應用范圍而造成的后果不承擔法律責任。(2)“多維科技“和“多維科技 感知未來”是江蘇多維科技有限公司的合法注冊商標。

      • 在線客服

      <track id="6lrpm"><ruby id="6lrpm"></ruby></track>

      1. <acronym id="6lrpm"></acronym>